Profil 45Z shaper installed in one of my customer's shops. They had previously been doing all their cope and stick work on a motley assortment of old stand-alone shapers (a pretty common scenario, actually) and were struggling with consistency, wasted material from botched runs, etc. Anyhow, they replaced three shapers by going with this one but check out the cool sled they grafted onto the Profil from one of the older machines. It's basically an aluminum bar stock "cage" with some pneumatic clamps off a Ritter machine. He just ordered an extra steel gib bar to bolt it down the the slider with. Comes right off with an allen wrench. I thought this was pretty slick.

Erik

Creative Cabs Profil 45Z.JPGProfil 45Z rail-and-stile.JPGProfil 45Z pneumatic sled.JPG