Originally Posted by
Steve Mathews
I'm surprised Jim. You were the one that led me to The Blastgate Co. but you didn't use their recommended tape.
I've never purchased from them...my system went in many years ago and is snaplock with most fittings from Oneida. It's not nearly as robust as yours is physically, however. I used foil tape (the good stuff, but available locally) Things evolve over time. For me, the tape has been a bonus because I've made many changes to my system over the years including several two years ago when my CNC went in.
Since I installed my setup, more vendors have become visible in the space.
--
The most expensive tool is the one you buy "cheaply" and often...