Ok, I've got a 20 watt Fiber laser. Several of you guys have 20 and 30 and maybe even a 50 watt.
I've a potential long term job that will take 30 to 60 minutes to complete with my 20 watt. Steel.
How much time could I look to save moving to a 30 or even 50 watt fiber.
From what I've seen, going to 30 would cut more than half the time, but no idea if 50 would cut another 20 or 50 Percent.
Anyone do time comparisons? I'm looking at going about 0.5mm (0.015 or so inches) deep with a 1/2" x2" pattern.