Results 1 to 2 of 2

Thread: Marking Jaw sizes onto a blank

  1. #1
    Join Date
    Mar 2010
    Location
    Quorn United Kingdom
    Posts
    773

    Marking Jaw sizes onto a blank

    I thought members may find this jig developed by a blind woodturner interesting


    https://www.axminstertools.com/axmin...d-sizer-106795

    see video at 2 mins 10 seconds

    https://www.youtube.com/watch?v=D63J...MBugMGCgJhchAB
    Last edited by Brian Deakin; 07-08-2020 at 3:37 PM.

  2. #2
    Join Date
    Jan 2020
    Location
    Hoschton, Georgia
    Posts
    116
    When I rough turn a bowl, I write the chuck and size jaws on the bottom along with the weight in grams and the date I turned it. I suspect that most turners can look at a tenon and be able to tell which set of jaws will fit.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •