-
Stan, Would you mind giving me an idea of the wax to mixture ratio. Thanks, Jack
-
jack, I dont think the ratio is too important, but here's an actual magazine article for reference so you know its not just my SWAG. https://www.popularwoodworking.com/w...il-wax-finish/ Dont forget to use indirect heat .
I just used a mason jar half full of oil, + a half ounce of wax. You can add some turpentine after it cools if it looks to thick. Its basically the same idea as the commonly used mineral-oil + beeswax that is used for cutting board finishes.
Last edited by Stan Calow; 07-10-2020 at 9:40 AM.
-
Stan, Thanks for the heads up. I will read the article. Jack
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules