Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: Cherry Finish

  1. #16
    Stan, Would you mind giving me an idea of the wax to mixture ratio. Thanks, Jack

  2. #17
    Join Date
    Apr 2013
    Location
    Kansas City
    Posts
    2,652
    jack, I dont think the ratio is too important, but here's an actual magazine article for reference so you know its not just my SWAG. https://www.popularwoodworking.com/w...il-wax-finish/ Dont forget to use indirect heat .

    I just used a mason jar half full of oil, + a half ounce of wax. You can add some turpentine after it cools if it looks to thick. Its basically the same idea as the commonly used mineral-oil + beeswax that is used for cutting board finishes.
    Last edited by Stan Calow; 07-10-2020 at 9:40 AM.

  3. #18
    Stan, Thanks for the heads up. I will read the article. Jack

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •