Hello,
I am a new member and am looking for some advice on getting a live center and new “arbor” for a very old lathe. This thing is from when Noah built the ark. It does not have a MT #2,#1.#0 . On the dead center end it has male fine thread with a hole bored into it to receive a sharp pin that is the center. The “arbor end” has a course thread that threads into a piece of metal that the wood is driven on to. The lathe came with a Sears face plate for bowl turning but nowhere else on the lathe does it say sears. I would have included pictures but my SLR camera exceeds the space limit for JPEGS. Any help would be appreciated.
Thanks
Todd