Results 1 to 11 of 11

Thread: Making Wooden Auxiliary Fences

  1. #1
    Join Date
    Sep 2009
    Location
    Northern Virginia
    Posts
    108

    Making Wooden Auxiliary Fences

    I need a nice easy project for the holiday weekend and thought I would make some auxiliary wooden fences for my Plough and Rabbet planes. Any tips on dimensions, types of wood to use or avoid, etc. would be greatly appreciated.

    Thanks, Bob

  2. #2
    Join Date
    Sep 2007
    Location
    Longview WA
    Posts
    27,347
    Blog Entries
    1
    Hi Bob, Do you mean wooden fences to add to a metallic fence?

    What planes are these going to be on?

    For my Record #778 a piece of rosewood was used:

    Front Wood on #778.jpg

    Best is a piece of hard wood that wears well. You also want it to be smooth like ash or rosewood.

    A hunk of wood was also added to the front to make it a bit more comfortable to use.

    Approximately 1/2" thick works well. You do not need it to be real thick, just thick enough to be held on by wood screws. You do want to make sure the piece is as parallel and square as possible over its length.

    jtk
    "A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
    - Sir Winston Churchill (1874-1965)

  3. #3
    Join Date
    Sep 2009
    Location
    Northern Virginia
    Posts
    108
    Wooden auxiliary fences that would be attached to the metal fence. I've got a Veritas Small Plough Plane and Veritas Skew Rabbet Plane that need the fences.
    I've got a couple of small pieces of Ebony, Pau Rosa and Angelique lying around that I thought might be used.

  4. #4
    Join Date
    Feb 2004
    Location
    Perth, Australia
    Posts
    9,469
    Bob, the fences I have are very similar across the planes I have. I use the hardwood to hand. In my case it is Jarrah ..



    Regards from Perth

    Derek
    Last edited by Derek Cohen; 07-01-2020 at 7:59 PM.

  5. #5
    Not to hijack the thread, but in what circumstances are the auxiliary fence called for? Just to make the plane more stable on narrow pieces?
    Last edited by Erich Weidner; 07-01-2020 at 10:41 PM. Reason: typo

  6. #6
    Join Date
    Feb 2004
    Location
    Perth, Australia
    Posts
    9,469
    Erich, that is an understatement. Stability = precision.

    Regards from Perth

    Derek

  7. #7
    Join Date
    Sep 2007
    Location
    Longview WA
    Posts
    27,347
    Blog Entries
    1
    Erich, it is also because the metal fence can leave marks on some woods. The wood fence is less likely to mark the work.

    jtk
    "A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
    - Sir Winston Churchill (1874-1965)

  8. #8
    Join Date
    Apr 2017
    Location
    Michigan
    Posts
    2,758
    UHMW would work better but it just wouldn't be right.

  9. #9
    Join Date
    Sep 2007
    Location
    Longview WA
    Posts
    27,347
    Blog Entries
    1
    Quote Originally Posted by Tom Bender View Post
    UHMW would work better but it just wouldn't be right.
    In reality, almost anything would work even plastic.

    In one of my earlier posts rosewood was mentioned. It is a very smooth wood with an oily nature. Ash is can be worked into an extremely smooth surface.

    A smooth surface is important for reducing friction.

    A hardwood helps to prevent wear.

    jtk
    "A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
    - Sir Winston Churchill (1874-1965)

  10. #10
    Join Date
    Feb 2004
    Location
    Perth, Australia
    Posts
    9,469
    Quote Originally Posted by Tom Bender View Post
    UHMW would work better but it just wouldn't be right.
    Just squiggle wax on the fence. Anyway, UHMW is not stiff enough, and ends up heavier than hard wood.

    Regards from Perth

    Derek

  11. #11
    Join Date
    Apr 2017
    Location
    Michigan
    Posts
    2,758
    Thanks Derek, I was having trouble with the vision of UHMW in that application

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •