Here is the issue... First this is happening on the 60 watt Epilog mini helix machine.
First file of the day (after power up) that is sent the etching, engraving and cutting is off no matter how many times I cut that file (we have used multiple files). After the first file sent and cut and does not cut correctly we send a different file that one works perfect (so second file sent to laser cuts perfect). Now we resend the original first file and it cuts perfect.

What is seems is the first file sent after the machine is started gets scrambled somehow. I have changed the network cable and no change. I do not think it can be mechanical as it fails multiple times on the same file. So if I run 1 the original file 1 time or 5 times it is bad once a different file is sent it works fine then resend the original file and it works fine. I just tried running the original file (failed 2 times) resent original file still fails a different file has to be sent before the original one cuts right.



bad cut.jpg