Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: Resurfacing OSB subfloor?

  1. #16
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    52,881
    What you propose would be difficult. If the subfloor is otherwise stable/safe, and since it's well, a subfloor, it doesn't need to be pretty. Fill the divots with mastic or something and if you really feel the need, cap that with 1/4" material before moving on to your new floor surface.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  2. #17
    I wouldn't spend any effort on trying to salvage a $10 sheet of OSB. Cut it out and throw in a new piece.

  3. #18
    Join Date
    Apr 2008
    Location
    Edmonton, Canada
    Posts
    2,287
    cut it into smaller pieces with shallow cuts, remove screws and clean the glued areas to I-joists. Put a new one down with glue/screwed to joists. Cleaner/better job.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •