My thoughts have drifted from a jobsite saw to a hybrid for all the advantages such a saw offers for the same footprint.
Which one should I be looking at?
Thank you for your thoughts
My thoughts have drifted from a jobsite saw to a hybrid for all the advantages such a saw offers for the same footprint.
Which one should I be looking at?
Thank you for your thoughts
Budget? Jet, Ridgid, Shop Fox Grizzly, Laguna, Bailey. Once you have a budget you can narrow the field. Hopefully owners will chime in. If you can find a used Craftsman 22124 I would grab that. I owned one of these Orion (Pre-Steel City) machines with the included Beisemeyer Commercial Fence. If not for a stroke of luck that let me move to a Saw Stop 3HP PCS I would still be using the 22124. I see them from $400 to $800. The fence is over $300 so do the math.
Last edited by glenn bradley; 06-23-2020 at 7:38 PM.
"A hen is only an egg's way of making another egg".
– Samuel Butler
About $1K is the budget. Grizzly G0899 exemplifies the type at which I am looking. Thanks for popinting out that oversight.