Is there any problems using a water based poly to finish a dining room table?
Is there any problems using a water based poly to finish a dining room table?
Jeff Body
Go-C Graphics
China 50W Laser
Model # SH-350
Controller RDC6442
Vinyl Plotter Graphtec CE600-60
Software used
Inkscape, FlexiStarter, VinylMaster 4, RDWorksV8
Modern waterborne finishes are very good compared to years ago. But there are many to choose from and some are better for table tops than others. There are quite a few discussions about this here in the finishing forum. I'm not a fan of waterborne products from the big box stores for this kind of thing, however. I generally use something like Target Coatings EM8000cv on table tops. General Finishes has some excellent products, too, that are often mentioned here.
--
The most expensive tool is the one you buy "cheaply" and often...