Results 1 to 11 of 11

Thread: Is there any issue with mounting air filter on its side?

  1. #1
    Join Date
    Apr 2020
    Location
    Tennessee
    Posts
    457
    Blog Entries
    1

    Is there any issue with mounting air filter on its side?

    I am buying the JET AFS-1000B and I'd like to mount it on its side but I'm not seeing anyone else do this.
    Has anyone positioned their filter on the side as shown below? Or does anyone know if there is an issue with this (bearings issue with motor or other)?

    Air Filter Location.PNG
    Last edited by Eric Arnsdorff; 06-01-2020 at 11:47 PM.

  2. #2
    Join Date
    Nov 2007
    Location
    NW Indiana
    Posts
    3,085
    I mounted that same model sideways on a wall about 10 years ago and no problems.

  3. #3
    Join Date
    Apr 2020
    Location
    Tennessee
    Posts
    457
    Blog Entries
    1
    Thanks Larry! That’s the info I was looking for!

  4. #4
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,850
    I had mine that way for a bit. No issues.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  5. #5
    Join Date
    Jun 2019
    Location
    Mid-Michigan
    Posts
    271
    If you read the installation manual closely, Jet says sideways is perfectly acceptable, and they include the brackets needed to do so. I have mine mounted vertically in much the same location as your drawing.

  6. #6
    Join Date
    Apr 2020
    Location
    Tennessee
    Posts
    457
    Blog Entries
    1
    Thanks all!! I kept seeing everyone’s install from the ceiling and began to question if there was a reason it couldn’t be placed in a different orientation. It’s a simple device but I wanted to make sure I wasn’t missing something.

  7. #7
    Join Date
    Dec 2019
    Location
    The old pueblo in el norte.
    Posts
    1,899
    Pretty much the only reason I'll hang mine from the ceiling is to reduce noise.
    ~mike

    happy in my mud hut

  8. #8
    Join Date
    Sep 2019
    Location
    Lafayette, CA
    Posts
    843
    I think you want it several inches away from the wall to promote flow.

  9. #9
    Join Date
    Sep 2016
    Location
    Modesto, CA, USA
    Posts
    9,978
    Make sure gravity will not make the filters fall out.
    You may want to rotate the motor 90 degrees so the oil holes are up. You do oil the motor every six months don't you?

    Bill D

  10. #10
    Join Date
    Oct 2007
    Location
    Falls Church, VA
    Posts
    2,344
    Blog Entries
    1
    Quote Originally Posted by Bill Dufour View Post
    Make sure gravity will not make the filters fall out.
    You may want to rotate the motor 90 degrees so the oil holes are up. You do oil the motor every six months don't you?

    Bill D
    Huh? You can oil the motor? Mine is 15 years old and never oiled.
    I know a guy that certainly would oil it as instructed. I’ve never known anyone else that replaces his car headlight bulbs when the manual says rather than simply waiting for one to burn out. He pays sticker price for his cars. He never negotiates. Name your price and he will accept or Politely reject.

  11. #11
    Join Date
    Sep 2016
    Location
    Modesto, CA, USA
    Posts
    9,978
    Quote Originally Posted by Roger Feeley View Post
    Huh? You can oil the motor? Mine is 15 years old and never oiled.
    I know a guy that certainly would oil it as instructed. I’ve never known anyone else that replaces his car headlight bulbs when the manual says rather than simply waiting for one to burn out. He pays sticker price for his cars. He never negotiates. Name your price and he will accept or Politely reject.

    Many shaded pole motors use sleeve bearings that are supposed to get a drop of oil every six months or year. Some of them have a little plastic plug but the hole does not actually connect. Kind of like the brake terminals on cheap VFD's that are not connected to anything. That said my whole house fan is probably supposed to be oiled but I am good if I vacuum the dust out of the motor every year or two.
    Bil lD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •