OP, I worked for an acrylic fabricator a few years back. Acrylic is easy to cut but if you have a need for cuts that delicate, I would look at having it done on a flatbed laser. As Bert said, it will tough to cut precisely with a Dremel.
Erik
Contributor
OP, I worked for an acrylic fabricator a few years back. Acrylic is easy to cut but if you have a need for cuts that delicate, I would look at having it done on a flatbed laser. As Bert said, it will tough to cut precisely with a Dremel.
Erik
Ex-SCM and Felder rep
Posting Permissions
Reply With Quote