Hello everybody
Today I show you a cylinder with a large opening on the side

unfortunately the tool has hooked in the end and the whole object is completely torn down,
I was able to bring it back together reasonably well, because the workpiece was too good to throw in the bin

Wood: walnut
Height: 54cm
Diameter: 22 cm
Wall thickness: 1-3mm

it was sanded up to 320 grit
Wood turner oil was used for the finish

Hope you enjoy it


Best regards


1 (2).jpg2 (2).jpg3 (2).jpg4 (2).jpg5.jpgWoodturning Walnut Cylinder.jpg