351AC837-3B82-4D44-A224-821080D313F0.jpgHi everyone. Hopefully someone77A8B49E-E155-4A2B-91D6-C96FD67B3FD5.jpg6D76AA21-CB7E-4502-84DB-028C0522DE32.jpg on here can help me out. I recently bought a used dewalt DW735 planer. The last owner said that the brushes in the motor were burned up so he replaced them, only to have them burn up again within a few minutes. He said that he then could not get the planer to turn on at all. He did upgrade the cutter head to a Shelix prior to this happening (not sure if that plays into the brushes
burning out) I also found a broken chain tensioner on the right side behind the height adjustment wheel.
Could it be the armature? Is the whole motor shot? I don’t have A lot of knowledge of motors besides what I’ve looked up about this.
I got the unit for $300 with the outfeed tables, mobile base, and shelix head, so I’m hoping I got a steal and can get it running again!!
thanks in advance
Tim