Results 1 to 3 of 3

Thread: Finish for a glass or cup.

  1. #1
    Join Date
    Jan 2014
    Location
    Near Springville, AL
    Posts
    137

    Finish for a glass or cup.

    If I made a glass or cup out of walnut what finish could I use that would stand up to wine or cola products?

    Thanks for any help.

  2. #2
    If it's an old design I would use bees wax. Modern design ... Epoxy.

  3. #3
    Join Date
    Sep 2007
    Location
    Lincoln, NE
    Posts
    1,213
    I receintly used super glue on a walnut chalace, tested for over 4 hours and no leaks. Epoxy should work as well but will not be able to use more than a thin coat otherwise it will run while it is curing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •