Results 1 to 3 of 3

Thread: 4" Blast gates

  1. #1
    Join Date
    Jan 2019
    Location
    Council Bluffs, IA
    Posts
    11

    4" Blast gates

    Blast gate.jpg

    When I first started with v carve it was a bit overwhelming.

    I'm still barely scratching the surface of what the software is capable of but its amazing how fast you can get into it and knock out something useful.

  2. #2
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    52,870
    You will find that the software and toolpathing will become almost second nature in an amazingly short period of time if you just use it! I've often said that like to a hammer, everything is a nail, there's a similar thing that happens when we get a CNC in our shops. "Can I do this with my CNC?" "What part of this can I do with the CNC?" Etc. Nice job on that blast gate!
    --

    The most expensive tool is the one you buy "cheaply" and often...

  3. #3
    Join Date
    Apr 2017
    Location
    Tucson, Arizona
    Posts
    772
    Quote Originally Posted by Nicholas Dirks View Post
    Blast gate.jpg

    When I first started with v carve it was a bit overwhelming.

    I'm still barely scratching the surface of what the software is capable of but its amazing how fast you can get into it and knock out something useful.
    Nice job Nicholas!
    David

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •