Blast gate.jpg
When I first started with v carve it was a bit overwhelming.
I'm still barely scratching the surface of what the software is capable of but its amazing how fast you can get into it and knock out something useful.
[OP]
Member
Blast gate.jpg
When I first started with v carve it was a bit overwhelming.
I'm still barely scratching the surface of what the software is capable of but its amazing how fast you can get into it and knock out something useful.
Moderator
You will find that the software and toolpathing will become almost second nature in an amazingly short period of time if you just use it! I've often said that like to a hammer, everything is a nail, there's a similar thing that happens when we get a CNC in our shops. "Can I do this with my CNC?" "What part of this can I do with the CNC?" Etc. Nice job on that blast gate!
--
The most expensive tool is the one you buy "cheaply" and often...
Contributor
Nice job Nicholas!Originally Posted by Nicholas Dirks
David
Posting Permissions
Reply With Quote