I bought a used Omga T53-370 miter saw recently. The owner thought it was a T50, but it isn't. Also, it came with a single phase motor (we have 3 phase so either is fine). OMGA told me the biggest difference is that the single phase takes longer to spin up to speed.
image0.jpeg

It weighs 250# plus so it's staying in the crate until the resting spot is prepped. Here is where it's going.
61184756932__0CD13F7A-6027-41EA-A734-2ADBE8DCEEA7.jpg

I'm looking to add a manually positioned digital stop system to the right and a slave fence to the left. So far, I found offerings from JADawley GlideStop, Accurate Technology ProStop, and Maya Posi-Stop. TigerStop and RazorGage are automated and out of consideration. Any thoughts on these or others?

The bench top is neither flat nor level. We can certainly spend the effort to do so if warranted. I think I may prefer removable extensions to use the bench for other things. Would it make more sense to put in elevated extensions with fence using levelers?

Has anyone used the vertical and horizontal clamps? How are they controlled?

Any other tips or things I should link at?