Results 1 to 4 of 4

Thread: Finger labyrinth

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2012
    Location
    NW Louisiana
    Posts
    684

    Finger labyrinth

    A friend asked if I could make a finger labyrinth for his son. I grabbed a photo off the Internet, did some modifications, and cut this out of Maple for him. It's about 11.5" diameter and finished in Nitrocellulose lacquer.

    001 - Finger labyrinth, Maple.jpg

    002 - Finger labyrinth, Maple.jpg

    David
    David
    CurlyWoodShop on Etsy, David Falkner on YouTube, difalkner on Instagram

  2. #2
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    3,538
    Very nice David.
    Retired Guy- Central Iowa. , LightObject 40w CO2 Laser and Chiller , WorkBee 1000x750 CNC Router - Mach4 - Windows 10

  3. #3
    Join Date
    Apr 2017
    Location
    Tucson, Arizona
    Posts
    772
    So the idea is that you put a marble or small steel ball into the slot and try to roll it into the middle of the board?

  4. #4
    Join Date
    Jan 2012
    Location
    NW Louisiana
    Posts
    684
    I guess you could run a marble down the groove. The 6-year old I made this for has trouble going to sleep and his parents thought that if he could run his finger along the groove while he was trying to settle down for sleep that this might help. So I guess it's supposed to be soothing and that's why it's called a 'finger' labyrinth.

    David
    David
    CurlyWoodShop on Etsy, David Falkner on YouTube, difalkner on Instagram

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •