Good afternoon everyone. I posted to the Felder group but thought I would also ask here. I have a FB510 bandsaw purchased the end of March 2019. It has around 50-75 hours of use. I went to use it a couple of days ago and it did not sound right. The tire on the lower wheel was coming off towards the rear of the machine. I reinstalled and tried again. It ran for a short time and did it again and the upper tire came off towards the front of the machine. I checked the alignment of the wheels and the blade adjustment. Everything was correct. I have 1/2” blade on the machine. I did notice that the tires seemed very loose on the wheels. It very little effort to push them off. That didn’t seem right. Can the tires have stretched that much already. That doesn’t seem right for a saw with so little use.
Thanks for any help
Mark Paavola