I 'upgraded' my Delta 14" to Carter urethane tires, and now the blade is centered on the upper wheel, but rides with teeth protruding off the front edge of the lower wheel. Take a look at the attached picture. The wheels are coplanar, I've got the top wheel tilted as far back to almost touch the rear housing, and still can't get the blade off the front edge of the lower wheel. I notice the new tire doesn't quite come up to the lip of the wheels and blade is riding on the aluminum lip of the lower wheel. Is my new tire too thin? Is this a reasonable way for a bandsaw blade to ride? Any hints are welcome.
bandsawtire2.jpg