Results 1 to 4 of 4

Thread: Miter saw fences

  1. #1
    Join Date
    Nov 2006
    Location
    Minneapolis, Minnesota
    Posts
    2,108

    Miter saw fences

    Does anybody make miter saw fences similar to the heavy duty ones that Biesemeyer made a long time ago?

    Jason419a7wYQCYL._AC_SX355_.jpg

  2. Fast cap and a few others do. I personally use the Fast Cap Best Fence system. The cabinet shop that I just started working in part time use the same Best Fence setup on their upcut saws. Very nice system and lots of adjustment.

  3. #3
    I got the Kreg Trak and Stop Kit and built my own. The only challenge I had with it was the cabinets it is on (re-used kitchen cabinets) not being perfectly in-plane, which would be a problem with an off-the-shelf system as well. But I love just being able to set a length, trim one end, then cut the other to length.

    Bruce

  4. #4
    Join Date
    Nov 2006
    Location
    Minneapolis, Minnesota
    Posts
    2,108
    Yes, the 3-way adjustment features on the FastCap are very interesting. I've built my own fences in the past and can never get them dialed in perfectly, despite much shimming and cussing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •