Does anybody make miter saw fences similar to the heavy duty ones that Biesemeyer made a long time ago?
Jason419a7wYQCYL._AC_SX355_.jpg
Does anybody make miter saw fences similar to the heavy duty ones that Biesemeyer made a long time ago?
Jason419a7wYQCYL._AC_SX355_.jpg
Fast cap and a few others do. I personally use the Fast Cap Best Fence system. The cabinet shop that I just started working in part time use the same Best Fence setup on their upcut saws. Very nice system and lots of adjustment.
I got the Kreg Trak and Stop Kit and built my own. The only challenge I had with it was the cabinets it is on (re-used kitchen cabinets) not being perfectly in-plane, which would be a problem with an off-the-shelf system as well. But I love just being able to set a length, trim one end, then cut the other to length.
Bruce
Yes, the 3-way adjustment features on the FastCap are very interesting. I've built my own fences in the past and can never get them dialed in perfectly, despite much shimming and cussing.