-
Loose tenons may be another option. I would use my domino but a plunge router would also do it. The edges will be rounded, however, but you can fairly easily get a tight fit. With a plunge router, I would make a little jig.
-
Super accurate layout lines, on both sides. Cut almost to the line then use a chisel to finish the final fitting of the mortise, and a chisel or shoulder plane to finish the tenon to fit. The key is cutting almost to the line.
Regards,
Tom
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules