I'm setting up a finishing room in my new shop and recently purchased a spiffy new 3-phase exhaust fan. The connection diagram on the motor plate indicates the need for thermostats (see pic below), however, I don't want the fan to be temperature controlled. I just want to be able to turn it on and off manually. There are two wires labeled P1 and P2 for the thermostat control. I'm wondering if I can just put a simple switch in between those control wires to turn the fan on and off? Or is it more complicated than that? Any advice from the electrical experts out there is certainly appreciated.
Thanks,
Tom
IMG_1491.jpg