Sifting through some of the "extras"...found an old Stanley Defiance chisel....

back needed flattened a bit better, had been badly hollow ground on the bevel....handle wasn't fitted right, and was loose..
back is now as flat as can be...
Rehab Chisel, flat back.JPG
handle now fits, and is tight. Even sits straight..
Hollow grind was done away with...then sharpened to 2500 grit, and then a clean strop..
Rehab Chisel. sharpened.JPG
25 degree, single flat bevel...
Rehab Chisel, 1.5 in. wide.JPG
1-1/2" wide. Stanley Defiance No. 1251...
Ready to join the other "Wide Bodies"...
Rehab Chisel, wide bodies.JPG
..guess I need to build a rack for these...next?

About...20 minutes of "drudgery", maybe?