Hi all,

I spent half a day putting together a moxon vise from white oak leftover from a friend's canoe build and using hardware from Tom Bussey that has been languishing since last October (thanks Tom!).

Mine version is not as fancy Derek's, but I did drill a hole for a swing arm lamp/dog hole on either end Ran a toothing plane over one side and have crubber for the other-not sure it will need the crubber. 26" between the screws, which is overkill for most of what I do, but hey, that's how long the board was. One coat of BLO. Set up to use with holdfasts or clamps. Will be using for a bunch of drawers just on the other side of finishing a jewelry box.

Hope everyone is safe and getting some shop time.

Best,
Chris

IMG_6802.jpgIMG_6805.jpgIMG_6806.jpg