Results 1 to 5 of 5

Thread: Need Nova Scroll chuck key

  1. #1
    Join Date
    Jul 2009
    Location
    West Boylston Massachusetts
    Posts
    554

    Need Nova Scroll chuck key

    Click image for larger version. 

Name:	4B9335F6-FCBB-4FEA-9E63-1D29DF82325D.jpg 
Views:	9 
Size:	97.7 KB 
ID:	429290
    Older Nova Chuck Chuck need Key. See photos, Marked Teknatool Nova Scroll
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	F96AF0E3-0A24-4893-B8F0-D3BDE987C8D0.jpg 
Views:	10 
Size:	114.9 KB 
ID:	429283   Click image for larger version. 

Name:	B3D668B8-670F-45BD-89A3-7CC4FAB957E2.jpg 
Views:	8 
Size:	97.6 KB 
ID:	429286  
    Last edited by kevin nee; 03-31-2020 at 8:42 PM.

  2. #2
    Join Date
    Feb 2003
    Location
    San Antonio, TX
    Posts
    327
    I'm not sure if this is the right key.
    Click image for larger version. 

Name:	IMG_1037.JPG 
Views:	11 
Size:	47.9 KB 
ID:	429316

    Picked up at a garage sale around the block from me (literally about 8 houses down). I think the actual chuck went with the Lathe that was sold earlier in the day (went when she was finishing up)

    There were also some Jaws for the chuck in the box.

    Click image for larger version. 

Name:	IMG_1039.JPG 
Views:	13 
Size:	77.2 KB 
ID:	429315

    I couldn't remember which chuck I had on my Jet mini lathe (was the Oneway not the Nova)).

    John
    San Antonio, TX

    Edit: It has the number 48203 stamped on the shaft if that helps figure out whether it will work.
    Last edited by John Stankus; 04-01-2020 at 12:16 PM.

  3. #3
    Join Date
    Feb 2003
    Location
    San Antonio, TX
    Posts
    327
    Looked further... I think the one I have is a G3 chuck key.

    I did see this from the UK
    https://www.toolpost.co.uk/product/c...upernova-chuck

  4. #4
    If you need some Jaws, I have an extra 25mm and a few extra 50mm sets.

    John, which Jaws do you have?

    Thanks,
    Lance

  5. #5
    Join Date
    Feb 2003
    Location
    San Antonio, TX
    Posts
    327
    On my commute this morning I detoured to stop at the shop (turned left at the laundry room rather than right )

    My guess is that this was one of the Nova small project jaw assortments (perhaps 6038 but can't find a number anywhere on the box)
    Here are some "semi" better pictures

    Looks like mini Cole jaws
    Click image for larger version. 

Name:	IMG_1040.JPG 
Views:	8 
Size:	75.2 KB 
ID:	429405

    The other two sets of jaws in here. I did not see any numbers engraved (but I didn't look too hard). They appear to be in original bags. I am guessing never used. (sorry the pictures through the plastic bags aren't great)
    Click image for larger version. 

Name:	IMG_1041.JPG 
Views:	9 
Size:	87.1 KB 
ID:	429404 Click image for larger version. 

Name:	IMG_1042.JPG 
Views:	9 
Size:	80.3 KB 
ID:	429406 Click image for larger version. 

Name:	IMG_1043.JPG 
Views:	11 
Size:	92.8 KB 
ID:	429407


    This the rest of the box of stuff they came in. I bought the box more for the keyless drill chuck. Not sure what the big flat wrench is for(tightening the chuck on the spindle?). The plastic bag that didn't render well in the photo looks to have maybe a woodworm screw for the chuck. I've only dabbled a little in turning (some pens,and one or two small bowls), so I am not much of an expert on the parts.
    Click image for larger version. 

Name:	IMG_1044.JPG 
Views:	17 
Size:	96.5 KB 
ID:	429408

    John

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •