Using Rikon 10-326 I need to cut curves in an 8 inch thick stack of poplar and pine glued up with Titebond 2. I have 3 blades to select from: Lenox Flex back 3/4 inch .032 thickness 2 teeth per inch hook, wood slicer 1/2 inch .022 thickness 3-4tpi variable pitch, or Lenox Flex back 1/4 inch .025 thickness 6 tpi. At first thought I would use the wood slicer, but when slicing a curve recently with an older wood slicer blade I noted it was very hard to follow the curve, perhaps because of the small set. Anybody use the wood slicer resawing curves? Thoughts? If I go real slow, will the 1/4 inch blade work?stack with weight.jpgclamped stack.jpgcurve template.jpg