Results 1 to 8 of 8

Thread: Table Saw Power Feeder Size

  1. #1
    Join Date
    Mar 2010
    Location
    Santa Cruz, Ca
    Posts
    10

    Table Saw Power Feeder Size

    Has anyone used a Grizzly 1/4 Hp Power Feeder (G4176) with the “Quick Holder Mounting Bracket” on a table-saw? I’m not sure if a 1/4 Hp unit will have sufficient torque and if the Grizzly bracket will be adequate to keep the feeder secure.
    Thanks,
    Pat

  2. #2
    Join Date
    Dec 2006
    Location
    Toronto Ontario
    Posts
    11,247
    1/4 HP is fine, the issue with the small feeders is hold down force and rigidity.

    I use a feeder on my saw.

    A small feeder is still going to be better than a person.

    Make sure that your fence can withstand the forces....Rod.

  3. #3
    Join Date
    Mar 2010
    Location
    Santa Cruz, Ca
    Posts
    10
    Thanks Rod. I have a StopStop - the fence is pretty solid.
    I assume you tapped holes into the cast iron table?
    Thanks again.
    Pat

  4. #4
    Join Date
    Oct 2018
    Location
    New Boston, Michigan
    Posts
    247
    I use the Grizzly 1/4" hp feeder with the quick holder on a Grizzly 1023 cabinet saw. I rip 8/4 and 9/4 walnut with it. No problem. The quick holder is a beast. No flex. 1/2" plate steel.
    Ask a woodworker to "make your bed" and he/she makes a bed.

  5. #5
    Join Date
    Dec 2006
    Location
    Toronto Ontario
    Posts
    11,247
    Hi Pat, my saw has a feeder on a flip up bracket as it’s a saw/shaper.....Rod

  6. #6
    Join Date
    Mar 2010
    Location
    Santa Cruz, Ca
    Posts
    10
    Thanks Gordon - along with Rod, that completely answers my question!
    pat

  7. #7
    Join Date
    May 2018
    Location
    Lancaster, Ohio
    Posts
    1,346
    Will the feeder trip the SawStop??
    picture of how to mount feeder in relation to blade would help a lot
    thanks
    Ron

  8. #8
    Join Date
    Nov 2012
    Location
    North Dana, Masachusetts
    Posts
    486
    I have a Delta 1/8 hp mini feeder that I use on a 3 hp Powermatic 66 and a 5 hp Powermatic shaper. It does fine if the wood is milled. I wax the tables with gulf wax, and clean the wheels with isopropyl alcohol. On a saw, the feeder needs a shop vac crevice tool jammed between the first and second wheels, right over the blade, to prevent sawdust build up on the wheels. The only problem with the little feeders is the lack of reach. That little feeder holds surprisingly well. I just ran handrail on the shaper using a 4" diameter x 3" tall molding head, and the wood ran fine. About the only thing I need a heavier feeder for on the shaper is raised panels. I have another big feeder.

    The 1/4 hp feeder should be heavy enough for most ripping.

    On a saw, I put the first and second feeder wheels straddling the blade, toed in 1/4" towards the outfeed. The blade is 1/8" higher than the wood is thick. The rollers are very close to the blade.
    Last edited by William Hodge; 03-29-2020 at 9:13 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •