Results 1 to 3 of 3

Thread: Replacement Epilog laser mirrors and lens

  1. #1
    Join Date
    Jun 2008
    Location
    Ada, Oklahoma
    Posts
    411

    Replacement Epilog laser mirrors and lens

    Are there 3rd party suppliers for mirrors and lens for an Epilog mini 18 laser?
    If so, have you used any you would recommend?
    Thanks.

  2. #2
    Join Date
    Nov 2006
    Location
    Maple, Ontario, Canada
    Posts
    982
    Laser research optics (Providence RI) would have what you need.
    Trotec Speedy 300 - 60w, with Quatro CSA-626 fume extraction
    Xenetech 1625 x2,
    New Hermes TX pantograph, CG4 cutter grinder
    Brady Globalmark2 label printer,
    Assortment of custom tooling , shears & punches, heat bender.
    Software: Xenetech XOT, Corel X3, Bartender label software

  3. #3
    Join Date
    Jun 2008
    Location
    Ada, Oklahoma
    Posts
    411
    Tony, thanks for the reply. I checked them out, but it was cheaper to buy directly from Epilog which was suprising and the tech I have talked to at Epilog has been especially helpful.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •