So my though is to buy a electronic standing desk frame with or adding casters.
Use a kreg adaptive cutting system table top on it for the top.
Would allow me to use it as a track saw table like normal at whatever height is most comfortable.
Change the heights and use it as an outfeed table for my table saw and planer.
Lower it down and store underneath a current bench. Looking at ones with 2 side legs and an upper center support so it could go over the top of tools or what not when its under the bench.
The ones im looking at are rated at between 200 and 350lbs, its the strength of the lift motors and how solidly it will lock at a height with weight on it that is worrying me.
Save $150 not buying with the kreg stand which offsets the cost some.
Anyone have any good points to talk me in to or out of this?