Need Belt Size for DJ-20 Jointer

[Izzy Charo]

Hello,
I want to change the belt on my DJ-20...the manual does not provide the length or even the Delta part number. If someone has this information, or better yet a reference for a replacement belt that works well, I would be most appreciative!
Thanks,
Izzy

[Mike Kees]

Take the old one with you to a parts store. if there is no number on it to cross reference they can always measure it.

[Bill Dufour]

Buy a cloth tape measure at the dollar store and measure it in place or remove it and roll it along the table to measure the outside length.
Bil lD.

[Aidan McCarthy]

Delta PN: 51-009

Length: 48"
Width: 0.50"
Height: 5/16"

The Gates AX48 is a nice after-market replacement.

[Bill Dufour]

Harbor fright has a link belt for a reasonable price. Seems to be good quality. I think it is USA made.
Bill D