Results 1 to 3 of 3

Thread: CMT333 drill bit recommandation.

  1. #1
    Join Date
    Dec 2017
    Location
    WNC
    Posts
    61

    CMT333 drill bit recommandation.

    Hello,

    I bought a CMT333 without drill bits and I need 1/8” (3mm)
    drill bits for the wood screws for the blum 38h hinges I am planning to use.
    The ones CMT offers and are mentioned in manual are all bigger,
    at least the ones I could find.
    Which I assume are for the ones with plastic inserts.
    Contacted CMT but still have to hear back from them.
    Does anyone have a recommendation?

    Thank you.

  2. #2
    Join Date
    Mar 2003
    Location
    San Francisco, CA
    Posts
    10,304
    Here's a page on the CMT site showing 3mm boring bit in the left-hand spiral. https://www.cmtorangetools.com/na-en...dowel-drills-2

  3. #3
    Join Date
    Dec 2017
    Location
    WNC
    Posts
    61
    Quote Originally Posted by Jamie Buxton View Post
    Here's a page on the CMT site showing 3mm boring bit in the left-hand spiral. https://www.cmtorangetools.com/na-en...dowel-drills-2
    Guess my searching skills are not as good as I thought.
    Thank you very much.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •