[OP]
Member
Hi,
We have recently invested in a fibre laser direct from China which has come with the EZ CAD 2 package. We have been having multiple issues with the software (mentioned in thread "Fibre laser engraving random lines using EZ Cad 2") so I was wondering if anyone with more fibre laser engraving experience has come across better alternative software packages?
We need the software to be able to engrave text and vectors on both flat bed and rotary using a 30W fibre laser.
There are none
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
Member
There are other softwares but they cost the same as some Chinese lasers, samlight & prolase being two but ezcad is a very simple but effective operating system. Handling your artwork improperly causes far more problems than ezcad, it will do the same in the high end systems too. PS these other packages won’t work with the installed ezcad board.
355 - 10400 : )
Posting Permissions
Reply With Quote