https://www.amazon.com/Amana-Tool-61...2935350&sr=8-5
Apparently this is an old school blade they've had for years. It does a great job cutting, but it is .135 thick so it needs a saw with some good horsepower. The cuts are pre sanded smooth. lol
https://www.amazon.com/Amana-Tool-61...2935350&sr=8-5
Apparently this is an old school blade they've had for years. It does a great job cutting, but it is .135 thick so it needs a saw with some good horsepower. The cuts are pre sanded smooth. lol
I have one of their thick blades, but don't think it's that one. I use it when I'm cutting tenons vertically on the table saw. It's stable regardless of depth of cut, or wood grain, and leaves all the tenons exactly the same.
edited to add: I also have an old, thick 10" Systematic crosscut blade that gets used only (mostly) for tenon cheeks on a 12" RAS. Both blades are perfect for those jobs.
Last edited by Tom M King; 02-28-2020 at 7:41 PM.