I stand corrected sir. I got distracted the middle of my response and when I came back to finish I was thinking about a different situation for some reason. Something about the tire not being set on the rim Apologies for my misinformation
I stand corrected sir. I got distracted the middle of my response and when I came back to finish I was thinking about a different situation for some reason. Something about the tire not being set on the rim Apologies for my misinformation
No shortage of 2-stage's these days.
You might need a pretty big nitrogen tank. Typical pressure in a tank is 2000 psi but the volume is not huge - just about 80 cu ft in a "Q" tank, the largest you can own AFAIK. You can lease larger tanks. But the pressure will go down quickly with use. Maybe OK for topping off? But if you buy a tank you need to buy a regulator and hose and fittings too, can get expensive.
I have truck and trailer tires that need 90 psi and sometimes I also wish the turn-on pressure were a bit higher - I think mine is set to come on at about 85 psi. I use an IR 5hp two stage 60 gal compressor.
What about one like this for topping off tires: https://www.amazon.com/GSPSCN-Portab.../dp/B07VVC1JHD I've used a smaller one on a truck tire and it worked OK but wasn't real fast.
JKJ