And...thinking about resawing them down to 3/8" or so.....like right down the center...

Bandsaw merely burns it's way along.....likes to wander a bit, too..

Might try the tablesaw....to cut a 2" deep kerf all the way around.....then use the handsaw to finish the cuts.....could just go to 1" or 1-1/2" deep....

As to what I will do with a stack of 3/8" thick boards....that remains to be seen....might even find a use for a 1/8" wide chisel....

Might see about some shop time, later this week...


Stay tuned...