Results 1 to 1 of 1

Thread: After a long search I found an easy surveillance cam program good for laser.

  1. #1

    After a long search I found an easy surveillance cam program good for laser.

    So I thought I would pass along this free and really easy program to use for my laser. It is called contracam.

    Simply plug in your usb or ip camera. Enter in its IP address on the computer that it is plugged in to, and then go to any browser type admin-pc8800 and there is your camera. I'm not sure if you can use more than one camera. I am going to try though as I have 2 lasers.

    So yes I just added a 2nd usb camera. And it will show both on your browser. I think you can load the software on the client machine also if you don't want to use a browswer
    Last edited by Clark Pace; 02-12-2020 at 9:12 PM.
    Redsail x700, 50watt & Shenhui 350, 50 watt

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •