Results 1 to 4 of 4

Thread: Plywood Stoarge

  1. #1
    Join Date
    Jan 2007
    Location
    Oskaloosa Iowa
    Posts
    270

    Plywood Stoarge

    I have a area above a office area that has a plywood floor. There is a enough area to store plywood horizontal.
    Would it be okay to store my good plywood on the plywood floor or should I build a 2x4 pallet to lay the plywood on ?
    Thanks

  2. #2
    Join Date
    Jul 2007
    Location
    NE OH
    Posts
    2,626
    I'd lay down a sheet of hardboard or rigid foam so the bottom sheet doesn't get scratched up, but otherwise, go for it. Make sure the construction of the office area can bear the additional weight; plywood can get heavy fast. It may not have been designed to support heavy loads.
    --I had my patience tested. I'm negative--

  3. #3
    Join Date
    Jan 2007
    Location
    Oskaloosa Iowa
    Posts
    270
    Thanks Paul
    The loft was build for storage. Its strong enough and easy to get to. Thanks again

  4. #4
    Join Date
    Jul 2007
    Location
    NE OH
    Posts
    2,626
    One more thought...make sure the area in question is flat with no big humps or dips. No point in pre-warping your plywood. If it's uneven, then it's probably worth building a low flat platform.
    --I had my patience tested. I'm negative--

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •