[OP]
Member
I have a Speedy 300 with the Iradion tube and my power is down to where I can still etch VERY slowly but cutting anything is not going to happen. I am going to send it off to get recharged but I am having trouble finding a video or set of instructions on how to remove the tube correctly. Can anyone assist?
Greg
Trotec Speedy 300 60W, with Rotary Attachment
Corel X8
Moderator
Greg
Contact Trotec support and they will send instructions.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Administrator
I replaced my Trotec tube last year. Mike is right, contact Trotec and they will send you a PDF file. FWIW its an easy task to remove and replace the tube.
Contributor
The RF tubes I've messed with at all have been "pre-aligned" and just require loosening- not even removing- a few screws, and unplugging the cable. Replacing is just as easy...
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now- fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Moderator
I agree. Many years ago I replaced the tube (Synrad) in my ULS and a few years ago I replaced the tube (Coherent) in my last Trotec. Both went back in easily and didn't require adjustment.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Posting Permissions
Reply With Quote