Results 1 to 5 of 5

Thread: Removing Speedy 300 Tube

  1. #1
    Join Date
    Dec 2012
    Location
    Allen, TX
    Posts
    79

    Removing Speedy 300 Tube

    I have a Speedy 300 with the Iradion tube and my power is down to where I can still etch VERY slowly but cutting anything is not going to happen. I am going to send it off to get recharged but I am having trouble finding a video or set of instructions on how to remove the tube correctly. Can anyone assist?

    Greg
    Trotec Speedy 300 60W, with Rotary Attachment
    Corel X8

  2. #2
    Greg
    Contact Trotec support and they will send instructions.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Woodworking shop CLTT and Laser Sublimation
    Evolis Card Printer
    CorelDraw X5

  3. #3
    Join Date
    Feb 2003
    Location
    Hayes, Virginia
    Posts
    13,470
    I replaced my Trotec tube last year. Mike is right, contact Trotec and they will send you a PDF file. FWIW its an easy task to remove and replace the tube.

  4. #4
    The RF tubes I've messed with at all have been "pre-aligned" and just require loosening- not even removing- a few screws, and unplugging the cable. Replacing is just as easy...
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


  5. #5
    I agree. Many years ago I replaced the tube (Synrad) in my ULS and a few years ago I replaced the tube (Coherent) in my last Trotec. Both went back in easily and didn't require adjustment.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Woodworking shop CLTT and Laser Sublimation
    Evolis Card Printer
    CorelDraw X5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •