Results 1 to 8 of 8

Thread: need replacement pin for Robo Rest.

  1. #1
    Join Date
    Jul 2013
    Location
    Cooper City, FL
    Posts
    62

    need replacement pin for Robo Rest.

    Hi,

    Anyone have an extra Robo Rest Pin, or know a good replacement?

    Thanks!!


    Sent e-mail to company, waiting for response.

  2. #2
    The owner of the company is active here. His name is Reed Gray aka robo hippy

  3. #3
    Join Date
    Jan 2011
    Location
    Norristown, Pa
    Posts
    189
    Didn't check but long allen wrench may work

  4. #4
    Join Date
    Jan 2012
    Location
    Roseville,Ca
    Posts
    407
    The “pin” on my Robo Rest is 1/8” diameter. A hobby shop should have what you need. Perhaps Reed Gray will chime in.

  5. #5
    I'd just find a piece of 1/8" round stock put a little bend in it and walla!
    Pete


    * It's better to be a lion for a day than a sheep for life - Sister Elizabeth Kenny *
    I think this equates nicely to wood turning as well . . . . .

  6. #6
    It is a loop T handle 6 inch hex wrench. You can probably find one at any big box hardware store or Graingers, or Fastenall. and probably cheaper than I could send you one for...

    robo hippy

  7. #7
    Has to be a story about why you need one. 😄

  8. #8
    Ummm, it has to be the shavings.....

    robo hippy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •