Hi,
Anyone have an extra Robo Rest Pin, or know a good replacement?
Thanks!!
Sent e-mail to company, waiting for response.
Hi,
Anyone have an extra Robo Rest Pin, or know a good replacement?
Thanks!!
Sent e-mail to company, waiting for response.
The owner of the company is active here. His name is Reed Gray aka robo hippy
Didn't check but long allen wrench may work
The “pin” on my Robo Rest is 1/8” diameter. A hobby shop should have what you need. Perhaps Reed Gray will chime in.
I'd just find a piece of 1/8" round stock put a little bend in it and walla!
Pete
* It's better to be a lion for a day than a sheep for life - Sister Elizabeth Kenny *
I think this equates nicely to wood turning as well . . . . .
It is a loop T handle 6 inch hex wrench. You can probably find one at any big box hardware store or Graingers, or Fastenall. and probably cheaper than I could send you one for...
robo hippy
Has to be a story about why you need one. 😄
Ummm, it has to be the shavings.....
robo hippy