Made out of Ash....some bright brass accents....just a weekend project..
Router Box Project Post, top of lid.JPG
Router Box Project Post, ready for work.JPG
Router Box Project Post, inside details.JPG
Router Box Project Post, latch fixed.JPG
Router Box Project Post, end view.JPG
Router is a rehab, found it hanging on an Antique Mall's wall....as a coat hook. Stain is more of that Gunstock that I use on Ash. Half blind dovetails at the corners, dust seal was milled with a Stanley 45. raised the lid's panel on the tablesaw. The other cutter, 3/8" wide, was made from an Allen wrench..
Two 1/4" plywood runners under the plane, allow the the plane to sit in the case even with the cutter lowered a bit. labels were downloaded from the web....
Not too bad of a project?