Page 3 of 3 FirstFirst 123
Results 31 to 33 of 33

Thread: My SawStop may have just injured itself!

  1. #31
    Join Date
    May 2019
    Location
    New Jersey (Morris County)
    Posts
    33
    Thomas, you can use a 3/4 dado set. You just have to use a set with the partial plate chippers. See the discussion above. I don't think you can use a 10" one though.

  2. #32
    Join Date
    Feb 2014
    Location
    Suffolk, Va.
    Posts
    208
    Quote Originally Posted by Brian Holcombe View Post
    Most likely bent the arbor. I can’t imagine these operate without bending the arbor.

    .010” wobble is terrible, should be negligible IMO.
    Actually mine has activated 3 times since I have owned it and my arbor is not bent.
    Michael Dilday
    Suffolk, Va.

  3. #33
    Join Date
    Apr 2017
    Location
    Michigan
    Posts
    2,758
    There's a cure for this that might save a few blades as well. Slow the saw down. I put a VFD and a slower motor on my Delta and it works great. It spins the blade at half speed or less. Half speed means 1/4 the energy. Unless you need production rates the slower feed is inconsequential. The quieter saw is nicer to use.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •