I know there are lots of folks that have vinyl cutters on here. I have a chance to buy a nice graphtec 6000-60 but he does not have the software. Is it possible to just purchase the software from graphtec or download it?
I know there are lots of folks that have vinyl cutters on here. I have a chance to buy a nice graphtec 6000-60 but he does not have the software. Is it possible to just purchase the software from graphtec or download it?
You don't need it.
You can get Graphtec studio for free to control the setting in the plotter.
Any cutting software will work for it. I use vinylmaster.
Another long shot is if the serial number has never claimed the software down load you maybe able to get the Graphtec pro studio which is a rebranded Flexi pro for FREE.
Flexi pro is a $2300 piece of software I believe.
Jeff Body
Go-C Graphics
China 50W Laser
Model # SH-350
Controller RDC6442
Vinyl Plotter Graphtec CE600-60
Software used
Inkscape, FlexiStarter, VinylMaster 4, RDWorksV8
If you have Corel Draw or Adobe Illustrator, you can just download the CM4 Plugin.
If you don't have either you can use Graphtec Studio.
Both are free and available at: https://www.graphtecamerica.com/cp-softwares
Trotec Speedy 360 - 80W, Graphtec CE6000-60, Brother GTX, Sawgrass SG400