Results 1 to 3 of 3

Thread: Graphtec software

  1. #1

    Graphtec software

    I know there are lots of folks that have vinyl cutters on here. I have a chance to buy a nice graphtec 6000-60 but he does not have the software. Is it possible to just purchase the software from graphtec or download it?

  2. #2
    You don't need it.
    You can get Graphtec studio for free to control the setting in the plotter.

    Any cutting software will work for it. I use vinylmaster.

    Another long shot is if the serial number has never claimed the software down load you maybe able to get the Graphtec pro studio which is a rebranded Flexi pro for FREE.
    Flexi pro is a $2300 piece of software I believe.
    Jeff Body
    Go-C Graphics

    China 50W Laser
    Model # SH-350
    Controller RDC6442
    Vinyl Plotter Graphtec CE600-60
    Software used
    Inkscape, FlexiStarter, VinylMaster 4, RDWorksV8

  3. #3
    Join Date
    Jan 2017
    Location
    Los Angeles
    Posts
    21
    If you have Corel Draw or Adobe Illustrator, you can just download the CM4 Plugin.

    If you don't have either you can use Graphtec Studio.

    Both are free and available at: https://www.graphtecamerica.com/cp-softwares
    Trotec Speedy 360 - 80W, Graphtec CE6000-60, Brother GTX, Sawgrass SG400

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •